PD Water Systems - Fan Cooled
3-CE2PXX2 30C1VA1-SSBCXS - Pump Stations
PUMP STATION: BOOSTING APPLICATIONS
This pump station has been designed to work in boosting applications. Every detail in this unit has been carefully engineered to provide the best performance and durability. The pump station is tested for 2 days, to make sure that the product that our customer receive will perform beyond expectation, making onsite installation very easy.
Once the pump passes the operating test, it is submitted to a pressure test where the complete Pump Station is pressurized at 30 psi above the requested PRESSURE to prevent leaking.
- Less HP than average to reach the performance required
- High performance pumps to guarantee the best level of operation
- Existing pump stations can be upgraded to increase flow and/or pressure
Our products are provided either fully assembled or pre-assembled and are designed to be easily installed.
Our pump stations for boosting applications come with a check valve in the discharge to guarantee that water column or water hammer will not affect the pumps. The check valve is also able to avoid water recirculation between pumps.
PUMP STATIONS ASSEMBLED TO FAN COOLED VARIABLE FREQUENCY DRIVES
These pump stations come assembled with Variable Frequency Drives , electronic devices designed to keep the pressure of the system by modifying the speed of the pump motors. PD WATER SYSTEMS brings to the market the most advanced Variable Frequency Drives and provides its distributors with the best options for this application.
Variable Frequency Drives, in addition to maintaining the pressure in the system, bring the best protection to the pumps. By monitoring the pumps’ electrical parameters, our controllers can prevent the pumps from working under harmful conditions such as motor overload, dry running, working with broken pipes, etc.
The use of Variable Frequency Drives allows also important energy saving since the motor works at the minimum speed needed to guarantee the requested pressure and flow.
These Pump Stations are assembled to fan cooled Variable Frequency Drives which work as wall control panel. The cool down of the device is carried out by a fan installed to the back of the unit. These controllers use external pressure sensors and their use is intended for indoor installations only.
Recommended for the following applications:
Our Fan Cooled Variable Frequency Drives can work as a single unit or in multiple pump systems.
PUMP STATIONS ASSEMBLED TO END SUCTION CENTRIFUGAL PUMPS
- When the system will be working in indoor conditions
- When the pump flow is above 50 GPM
- When there is a preference of VFD with pressure sensor
This unit comes assembled to End Suction Centrifugal Pump and this is why we recommend its uses when there is no need for Stainless Steel pump. End Suction Centrifugal Pumps operate very well both in boosting and in lifting applications.
This pump station can work in applications with water table up to a depth of 12 feet.
PUMP STATIONS ASSEMBLED WITH STAINLESS STEEL AND LOW LEAD BRASS COMPONENTS
Committed to providing our customers with the highest quality products, PD WATER SYSTEMS has developed these pump stations combining STAINLESS STEEL and LOW LEAD BRASS components. These manifolds are assembled with EUROPEAN STYLE valves to reduce the size of the pump station and bring savings to the total cost.
MULTI PUMP STATIONS
This type of pump stations brings to the market a variety of advantages. The use of our line of SMART Variable Frequency Drives, which communicate among each other, brings the following advantages:
To learn more about our Variable Frequency Drives please check here.
- Pump alternation to guarantee the same lifespan to all the pumps.
- When all the pumps work at the same time, they keep the same rpm and for this reason we can guarantee the same lifespan to every pump.
- In normal conditions there is a master pump controller which controls the pump station and the other controllers work as slaves.
- If for any reason there is a failure in the master, one slave pump controller takes over and keeps the pump station working.
Make click to enlarge the image or other views