Logo PD Water Systems
PD Water Systems - Best Control Well Systems
BWSMSD07 17G40P - Easy Pump Systems
BEST CONTROL

The BEST CONTROL electronic pump controller starts and stops the water pump according the user’s needs.
It replaces the traditional pressure system of tank, pressure switch and float switch, offering more advantages such as:
 
• Easy installations.
• Reduced dimensions.
• Constant flow.
• No maintenance required.
• No need to install pressure tanks.
• Pump protection against dry running, with automatic 
  reset.

The BEST CONTROL electronic pump controller monitors the water pressure and flow rate that runs through it and protects the pump against dangerous working conditions like dry running.
When a tap is opened, BEST CONTROL starts the pump and keeps it running, delivering constant flow. 
BEST CONTROL stops the pump when the demand is near zero.


APPLICATIONS

BEST CONTROL is an electronic pump controller design for water pumps which pull water out of shallow wells, underground tanks, ponds or lakes to be used for:

• Residential boosting systems.
• Irrigation.

BEST CONTROL comes in two versions which only vary in their restart pressure calibrations:

• 22 psi
• 42 psi

FEATURES AND BENEFITS

• BEST CONTROL’s body is made of technopolymer.
• BEST CONTROL comes with built-in check valve.
• Pressure loss extremely low, for this reason it is possible to use BEST CONTROL electronic pump controller with capacity up to 40 gpm (See manual for pressure loss details).
• Spring/membrane water accumulator. A special membrane guarantees a high level of protection against overpressure. BEST CONTROL’s high capacity is essential to avoid frequent starts/stops of the pump in case of leaking in the pipeline.
• Circuit board: Easy to replace.

MSC

Mayor seguridad contra la marcha en seco, la boca de succión se sitúa por encima del eje de la bomba.

Carcasa robusta de una sola pieza.

Soporte de motor y base compacto en una sola pieza.

Bajo nivel de ruido con agua recubriendo los alrededores de las etapas.



APLICACIONES

  • Para suministro de agua.
  • Para uso doméstico, para el jardín y para riego.

CONDICIONES DE OPERACION

  • Temperatura del líquido: de 32°F a 95°F (0°C a 35°C).
  • Máxima temperatura ambiente: 104°F (40°C).
  • Presión máxima permitida en la carcasa de la bomba: 116 psi.
  • Uso continuo.

CONSTRUCCION

  • Bomba multietapa horizontal.
  • Carcasa robusta en acero inoxidable al cromo - níquel, con conexión de succión frontal por encima del eje de la bomba y descarga radial en el tope.
  • Etapas en Noryl.
  • Conexiones: Bocas roscadas NPT

MOTOR

  • Motor a inducción de 2 polos, 60 Hz (n ˜ 3.450 rpm).
  • Trifásico 230 / 460 V.
  • Monofásico 115 / 230 V, 115 V, 230 V.
  • Capacitor dentro de la caja de bornes.
  • Aislamiento Clase F.
  • Protección IP44.

CARACTERISTICAS ESPECIALES BAJO PEDIDO

  • Otros voltajes

MATERIALES

  • Carcasa del Cuerpo de Bomba: 
    Acero Cr-Ni 1.4301 EN 10088 (AISI 304)
  • Cubierta del Cuerpo de Bomba: 
    Acero Cr-Ni 1.4301 EN 10088 (AISI 304)
  • Eje de la bomba: Acero al cromo 1.4104 EN 10088  (AISI 430)
  • Tapón: Acero Cr-Ni 1.4305 EN 10088 (AISI 303)
  • Cubierta de la etapa: PPO-GF20 Noryl
  • Impulsor: PPO-GF20 Noryl
  • Sello mecánico: Carbón – Cerámica - NBR
BWSMSD07 17G40P
Make click to enlarge the image or other views
zoom

CHECK OUR COMPLETE LINE OF PRODUCTS