Logo PD Water Systems
PD Water Systems - Fan Cooled
1-VPS1005 50C3VA3-SSBFXS - Pump Stations
PUMP STATION:  BOOSTING APPLICATIONS

This pump station has been designed to work in boosting applications. Every detail in this unit has been carefully engineered to provide the best performance and durability. The pump station is tested for 2 days, to make sure that the product that our customer receive will perform beyond expectation, making onsite installation very easy.

Once the pump passes the operating test, it is submitted to a pressure test where the complete Pump Station is pressurized at 30 psi above the requested PRESSURE to prevent leaking.

Advantages:
  • Less HP than average to reach the performance required
  • High performance pumps to guarantee the best level of operation
  • Existing pump stations can be upgraded to increase flow and/or pressure
Our products are provided either fully assembled or pre-assembled and are designed to be easily installed. 

Our pump stations for boosting applications come with a check valve in the discharge to guarantee that water column or water hammer will not affect the pumps. The check valve is also able to avoid water recirculation between pumps.

PUMP STATIONS ASSEMBLED TO FAN COOLED VARIABLE FREQUENCY DRIVES 

These pump stations come assembled with Variable Frequency Drives , electronic devices designed to keep the pressure of the system by modifying the speed of the pump motors. PD WATER SYSTEMS brings to the market the most advanced Variable Frequency Drives and provides its distributors with the best options for this application. 

Variable Frequency Drives, in addition to maintaining the pressure in the system, bring the best protection to the pumps. By monitoring the pumps’ electrical parameters, our controllers can prevent the pumps from working under harmful conditions such as motor overload, dry running, working with broken pipes, etc.  

The use of Variable Frequency Drives allows also important energy saving since the motor works at the minimum speed needed to guarantee the requested pressure and flow. 

These Pump Stations are assembled to fan cooled Variable Frequency Drives which work as wall control panel. The cool down of the device is carried out by a fan installed to the back of the unit. These controllers use external pressure sensors and their use is intended for indoor installations only.

Recommended for the following applications:
  • When the system will be working in indoor conditions
  • When the pump flow is above 50 GPM
  • When there is a preference of VFD with pressure sensor
Our Fan Cooled Variable Frequency Drives can work as a single unit or in multiple pump systems.

PUMP STATIONS ASSEMBLED TO VERTICAL PUMPS

This unit come assembled to Vertical Pumps,  which find use in any kind of boosting application as well as when working in lifting conditions from a source such a storage tank or lake. This type of pumps can work in applications with water table up to a depth of 8 feet.

Recommended in the following applications:
  • When there is a requirement for a Pumping System in 100% Stainless Steel
  • With applications where very high pressure with a low HP  is needed 
  • When the temperature of the pumped fluid goes up to 240 F
  • When space is an issue, vertical pumps become very useful since the pump stations assembled with this type of pumps are very compact.
PUMP STATIONS ASSEMBLED TO STAINLESS STEEL COMPONENTS
 
Committed to providing our customers with the highest quality products, PD WATER SYSTEMS has developed a list of options to guarantee the perfect product for the required application. These pump stations are assembled with 100% STAINLESS STEEL components. 

The high quality materials used make our pump stations the best option for purification systems, with potable water, or with any application where such type of material is required.

CHECK OUR COMPLETE LINE OF PRODUCTS