Pedrollo - Sewage
VXCL 2" - Pumps
RANGE OF PERFORMANCE
Flow rate up to 224 gpm
Head up to 52 ft
LIMITS OF USE
Depth up to 30 ft
Liquid temperature up to 104°f
Solid handling max up to 2”
For continuous duty: minimum immersion 16” from pump base
CONSTRUCTION AND SAFETY STANDARDS
EN 60 335-1 EN 60034-1
IEC 335-1 IEC 34-1
CEI 61-150 CEI 2-3
INSTALLATION AND USE
VXCL SERIES PUMPS ARE MADE OF EXCEPTIONALLY ROBUST HEAVY-GAUGE CAST IRON, RESISTANT TO ABRASION AND LONG-LASTING, AND HAVE A VORTEX TYPE IMPELLER. THEY ARE SUITABLE FOR SEWAGE, WASTE WATER AND SLUDGE, INCLUDING WATER CONTAINING SOLIDS OR MUD. THEY ARE IDEAL FOR SEWAGE INSTALLATION, TUNNELS AND OTHER EXCAVATIONS, UNDERGROUND CAR PARKS AND SIMILAR APPLICATIONS.
PUMP BODY, MOTOR CASING: cast iron.
IMPELLER: cast iron.
BASE: stainless steel AISI 304.
MOTOR SHAFT: stainless steel EN 10088-3 - 1.4057.
DOUBLE SEAL: mechanical seal silicon carbide - widia -NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
MOTOR: submersible asynchronous, 2 pole, for continuous duty.
VXCL 2": single-phase 230V - 60 Hz Models up to 1.5 Hp have built in thermal protection.
2 Hp single-phase versions have a thermal protector provided in the winding for connection to the control box.
VXCL 2": three-phase 230V - 60 Hz.
-Thermal protectors are provided in the winding for connection to the external control panel
INSULATION: class F.
PROTECTION: IP 68.
VXCL (single-phase) Float switch.
30 ft “H07 RN-F” submersible power cable
1 Hp to 1.5 Hp models are supplied with control box with capacitor and manual reset motor protector.
2 Hp models are supplied with control box type QES 300 MONO.
VXCL (three-phase) 30 ft “H07 RN-F” neoprene power cable
OPTIONS ON REQUEST
- dual voltage: 230/400 V - 60 Hz
- other voltages or frequency 50 Hz
Make click to enlarge the image or other views
Click the menu to display technical information and do comparison