Logo PD Water Systems
Pedrollo - Centrifugal
AR - Pumps
NO LONGER IN PRODUCTION

RANGE OF PERFORMANCE
  • Maximum flow rate 47 gpm
  • Maximum head 105 ft
LIMITS OF USE
  • Manometric suction lift up to 23 ft
  • Liquid temperature up to + 195°F
  • Environment temperature up to + 130°F
CONSTRUCTION AND SAFETY STANDARDS
EN 60034-1
IEC 34-1
CEI 2-3

INSTALLATION AND USE
It is recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
THE CONSTRUCTION OF THESE CENTRIFUGAL PUMPS MAKES THEM SUITABLE FOR USE IN THE DOMESTIC, AGRICULTURAL AND INDUSTRIAL SECTOR. ALL THE WETTED PARTS ARE IN STAINLESS STEEL AISI 340 TO GUARANTEE TOTAL HYGIENE AND MAXIMUM RESISTANCE TO CORROSION.
The pump must be installed in enclosed places, or at least protected against inclement weather.

CONSTRUCTION CHARACTERISTICS
  • PUMP BODY: stainless steel AISI 304, with threaded ports.
  • BODY BACK-PLATE AND DIFFUSER: AISI 304.
  • IMPELLER: stainless steel AISI 304, of the type with centrifugal radial flow.
  • MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
  • MECHANICAL SEAL: ceramic - graphite - NBR.
  • ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
    AR 10: single-phase 115 V or 230 V - 60 Hz with capacitor and thermal overload protector.
    AR 10: three-phase 230/460 V - 60 Hz.
  • INSULATION: class F.
  • PROTECTION: IP 44.
  • REGISTERED MODEL nº 72753
OPTIONS ON REQUEST
Version in stainless steel EN 10088-3 - 1.4401 (AISI 316)
Special mechanical seal
Other voltages or frequency 50 Hz

PUMPED LIQUID
Clear water and compatibles with stainless steel 304.
AR
Make click to enlarge the image or other views
zoom
AR
Click the menu to display technical information and do comparison

CHECK OTHER LINE OF PRODUCTS...

CHECK OUR COMPLETE LINE OF PRODUCTS